RS232 remote interface

With this option, Technix power supplies can be controlled via RS232. You can also download those informations here: download application note

RS232 card blue square RS232 BOARD
  • Specialy design for HV environment
  • Multilayer PCB
  • Remotely control your generator with PC or device
  • Labview runtime available (option)
  • 9600 Bauds, full-duplex
  • ASCII protocol
  • 12 Bits resolution
  • 10 Hz Bandwith

The “L.A.B.TEC” (Laboratory Analog Board Technix) is designed to run without damages and control losses in very difficult environments as repetitive electrical arcs, parasitic atmospheres...

Micro-controller is fully protected from the random events produced on the output voltage and wich are generally responsible for the micro-controllers resets.

The board is made with a shielded structure and with special components acting as a complete protection.

bluesquare Control via COM-Port
Any device with a RS232 com port can drive the generator.

Communication is based on a question/answer principle : the computer sends on a line a coded ASCII character followed by the parameters needed for the instruction. The board answers immediately after reception and handling of the received characters.
link RS232

blue square Compatible with LABVIEW runtime (optional)

labview screenshot
  • User gets on his PC the image of the generator front panel
  • Settings and controls available like they should be on the front panel
  • All the functionality of the standard front panel:

  • Setting and Display of Voltage and Current
  • Indicators: HVon, HVoff, Voltage/Current Regulation, Line, Fault, Interlock, Remote mode
  • Preset & OCP/OCL functions
  • HVon, HVoff control
  • Inhibit
  • Histograms & Measurement savings